FlexStake Home | Golf Course | Highway | Parks-Recreation, Utilities | Fire Hydrant & Airport | Wallah Main Website

Economy Ez Drive Series
MTBF* Over 50 hits at 45 mph
Height Above Grade 3 1/2 ft. to 4 ft.
Anchor 18 1/2 inches in-ground
Weights  
Colors W, R, O, Y, G, Bu, Br, Gry
Sheeting Reflective
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

Ez Drive is the only post on the market that can be tied in a knot and yet is so stiff it can withstand high wind loading. This price competitive, moderate impact marker is also the easiest to install.

Ez Drive has been approved for highway use in some states for moderate and low impact locations such as off-ramps, curbing and barriers. The post is able to withstand up to 50 vehicular impacts at 45 mph.

Ez Drive is particularly well suited for marking parks and recreation facilities, buried pipelines, conduits and cables. Installed to the proper depth, it is virtually impossible to pull out of the ground.


Utility Markers Utility Marker UM 300 Series
MTBF* Over 75 hits at 55 mph
Height Above Grade 1 1/2 ft. to 4 ft.
Anchor 1 1/2 ft. in ground
Weights From 1.1 to 1.75 lbs.
Colors W, R, O, Y, G, Bu, Br, Gry
Sheeting Reflective
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

FlexStake Utility Marker (UM) is an economically priced, moderate impact, off-road sign post or marker that was developed to mark underground pipelines, cables, or other buried devices. Depending on customer label design, the patented convex faces are wide enough (three inches) to carry identifying signs readable at up to 100 feet.

Though not as impact-proof as our hinged, ultra-high-impact HD delineator, the Utility Marker can still take an unbelievable amount of abuse. In several certified tests, this unhinged marker withstood over 75 automotive hits at 35mph. And due to its patented barbed anchor, cattle and deer can rub against it without pulling it out of the ground.

Utility Markers SlimLine Reflective GLT
MTBF* 100 hits at 35 mph
Above Grade 3 to 4 ft.
Anchor 8 inches in ground
Weights 4.5 to 6.5 oz
Colors W, R, Y, G, Bu
Sheeting Reflective
*Mean time before failure. Results may vary depending upon type of installation and geographic location.

SlimLine Reflective GLT is a highly visible, cost effective marking post or traffic control device. Closely spaced, it appears to make a fixed barrier, but it can be run over by vehicles without damage to post or car - used as a traffic barricade for the general public while allowing passage for official vehicles. Used in off-road sports events, the stake flexes away from contestants reducing the chance of personal injury.

Slimline is simple to install and remove. It may be set in the AN500 anchor or be driven directly into a pre-drilled hole in dirt. To see optional AN500 click here. Like all of our small hinged posts, SlimLine can be mowed over by any standard reel mower.

Surface Mounts High Impact Utility Signs
MTBF 45 to 75 hits at 55 mph
Above Grade 3 to 4 ft.
Anchor Various - depending on application
Weights From 3.5 to 5 lbs.
Post Colors W, R, O, Y, G, Bu, Br, Gry
Sign Faces Reflective and Non-reflective
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

All standard signs are available that do not exceed the load carrying capacity of the post. We also carry in stock: K Marker, Chevron Marker and other small signs that are not pictured. Sign faces are cut from UV resistant, hi-impact, post-consumer recycled copolymer. Faces are silk-screened with hi-density, UV stabilized, copolymer inks. Faces are mechanically fastened to one of two posts: hi-impact duplex posts (as shown) and the hi-impact tubular post used in our highway channelizer. copolymer faces available in all standard colors. Specialized sign shapes and silk screening are available on special order.

Surface Mounts Snow Poles SL
MTBF 100 hits at 25 mph
Above Grade 3 to 4 ft.
Anchor 8 inches into snow or ground
Weights From 4.5 to 6.5 lbs.
Post Colors W, R, Y, G, Bu
Sheeting Reflective
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

Snow Poles SL are longer versions of our SlimLine Reflective GLT. These poles are highly visible, cost effective markers for ski and snow trail delineation or to mark hidden hazards under the snow. The pole is hinged. If buried only to the hinge line, the stake will flex away from sporting event participants, reducing the chance of personal injury.

Snow Poles are simple to install and remove. They may be set in the AN500 anchor or be driven directly into snow or a pre-drilled hole in ice. Snow Poles are all-weather, color-impregnated, UV stabilized, polycarbonate extrusions that will last many seasons. Available in standard colors shown above and in any color on special order.

WALLAH
4948 - 54th Avenue, Red Deer, Alberta, Canada T4N 5K8
Phone: (403)343-1672 Fax: (403)346-6261, Toll Free: 1-800-909-9927
Email: info@wallahsigns.com

To Top
Web Publishing By Leggeworks Consulting and Computer ConnectionsRed Deer, Alberta, Canada

Copyright 2002 Wallah. All rights reserved.