<<< previous page
 |
GlareScreen GS
| NF* |
Over 10 hits at 55 mph |
| Height Above Grade |
1 1/2 ft. to 3 ft. |
| Rail Lengths |
10 and 12ft. sections |
| Weights |
From 3.5 to 3.8 lbs. Per foot |
| Paddle Colors |
Green and Gray |
| Paddle Mounting |
Pop and go, no bolts required |
| Rail |
4 to 6 lag bolts per section |
|
|
*Never Failed
With its pop-and-go design, FlexStake GlareScreen GS is literally a snap to install. When fully assembled, GS weighs only 13
lbs. per 12 foot section, so rails can be popped together off-site and hand carried to the barrier. FlexStake GS needs only
four to six mounting studs per section, so labor and exposure to traffic are minimal. GS rails can be mounted on any rigid
surface. GS's narrow-paddle, all-copolymer design is the most price competitive glare screen on the market. |
|
 |
Bridge Markers BM
| NF* |
75 hits at 55 mph |
| Size |
36" x 30" |
| Mounting |
Brackets, Mild Steel (plated) |
| Weights |
5.5 |
| Colors |
Yellow and Black |
|
|
*Never Failed
FlexStake high-impact Bridge Marker (BM) is a pole-mounted assembly installed on both approaches to old narrow bridges.
Correctly installed, it protrudes 6" inches into the right-of-way to warn truckers they are in danger of running into the
bridge abutment. It is a true safety device for both trucks and bridge. Like all FlexStake products Bridge Marker BM is a
high-impact device, withstanding multiple truck mirror hits at 55mph. |
|
 |
High Impact Utility Signs
| MTBF |
45 to 75 hits at 55 mph |
| Above Grade |
3 to 4 ft. |
| Anchor |
Various - depending on application |
| Weights |
From 3.5 to 5 lbs. |
| Post Colors |
W, R, O, Y, G, Bu, Br, Gry |
| Sign Faces |
Reflective and Non-reflective |
|
|
*Mean time before failure. Results of
certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.
All standard signs are available that do not exceed the load carrying capacity of the post. We also carry in stock:
K Marker, Chevron Marker and other small signs that are not pictured. Sign faces are cut from UV resistant, hi-impact,
post-consumer recycled copolymer. Faces are silk-screened with hi-density, UV stabilized, copolymer inks. Faces are mechanically
fastened to one of two posts: hi-impact duplex posts (as shown) and the hi-impact tubular post used in our highway channelizer.
copolymer faces available in all standard colors. Specialized sign shapes and silk screening are available on special order. |
|
<<< previous page |
|
WALLAH
4948 - 54th Avenue, Red Deer, Alberta, Canada T4N 5K8
Phone: (403)343-1672 Fax: (403)346-6261, Toll Free: 1-800-909-9927
Email: info@wallahsigns.com
 |
|
